Find out how to make the most out of your RockPro

Tips & Techniques

Spanish Version Available HERE

01

Instructions

Using RockPro’s patented repair kit is quick and easy, no matter your experience level! Move your car out of the sunlight into your garage or a shaded area. Simply clean out the chip, assemble your RockPro unit, open your cartridge and insert into the RockPro device – ensuring it reaches the very bottom. Clean the suction cups and secure your RockPro device to the window over the pit until your RockPro device is resting on the glass; once your device is touching the glass give it one more quarter of a turn ensuring a good seal and a snug fit. Turn the auger screw upwards – counter clockwise – three quarters of the way up and let it set for about 2-3 minutes until the chip is clear; repeat this process as needed until the chip is mostly clear.

Once the chips is clear, push down on the plunger ensuring it goes all the way down. Then, turn the auger screw downwards – CLOCKWISE – and let the device set for another 2-3 minutes or until the chip is as clear as you can get it.

Once you’re done working on the chip, park your car in direct sunlight to cure the resin, about 2-3 minutes. Once the resin is cured, gently push your RockPro device out of the way, put one drop of pit filler on pit and cover it with a plastic tab (provided); let this set for another 2-3 minutes. Finally, remove the tab, scratch off your excess pit filler with a razor, clean your windshield with glass cleaner and a clean rag, and enjoy your newly repaired, chip-free windshield!

Looking to purchase the rockpro?
We have them in stock and ready to ship!
Shop RockPro